5:13 am
March 22, 2010
Spent yesterday and today pouring new bearings for Mike Neely's 50LG... Seems lots of people have interest in what it takes to do it... Thought I would share some photos..
[Image Can Not Be Found]
Here is what I started with... caps and frame all cleaned up with all the gook burned out.
[Image Can Not Be Found] Set up with the mandrel in place prior to the pour
[Image Can Not Be Found] The finished bearings in the caps..
A couple pics of the finished bearings in the frame, you can see the spacers are still in the babbit..
Not sure what happened to the post with the clutch pics... So here they are again
[Image Can Not Be Found] The mandrel and the ring I used to press the mandrel out..
[Image Can Not Be Found] The clutch poured with mandrel still in place
[Image Can Not Be Found] Turning the clutch bearing
[Image Can Not Be Found] Finished bearing ready to work!
Whatever you are, be a good one.
Abraham Lincoln
Most Users Ever Online: 668
Currently Online:
7 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Larry L: 1566
Grant: 1420
Bruce Macmillan: 625
Lee Cordochorea: 595
Lynn Gledhill: 572
JNewman: 520
Gene C: 504
J Wilson: 426
Eric Sprado: 383
Tom Allyn: 340
Member Stats:
Guest Posters: 22
Members: 8727
Moderators: 4
Admins: 1
Forum Stats:
Groups: 23
Forums: 97
Topics: 3538
Posts: 20289
Newest Members:
Jeffrey Funk, Tom, churndashmaven, cameliacity, fred.f.chopin, RuoYi, rodeoneerer, NWBABjorn, mddangelo, NevillbergerModerators: Steve McGrew: 77, N.W.B.A.: 72, webmaster: 0, bluehost: 0
Administrators: admin: 540