3:12 pm
June 3, 2016
Hi all,
I'm considering either the Anyang 88 or a Sahinler 110 (SM-50) machine. Based on the tup weight, it would seem that the SM-50's would be able to work larger stock more easily, but I have seen some opinions (from somewhat dated posts) that suggest that the two machines are fairly closely matched in terms of abilities. Anyang's have been improving over the last few years, I'm not sure if the SM-50's have been or not.
So - I would love to hear thoughts on a comparison of the two machines. I can probably get a lightly used SM-50 from 2010 for basically the same as a new Anyang 88. My first thought was definitely for the 110, but after reading a bit, I'm in the confused, over-analyzing state.
Any thoughts would be appreciated, esp. if you have hands-on with the two different machines.
Thanks for your thoughts,
Don
Most Users Ever Online: 668
Currently Online:
19 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Larry L: 1566
Grant: 1420
Bruce Macmillan: 625
Lee Cordochorea: 595
Lynn Gledhill: 572
JNewman: 520
Gene C: 504
J Wilson: 426
Eric Sprado: 383
Tom Allyn: 340
Member Stats:
Guest Posters: 22
Members: 8727
Moderators: 4
Admins: 1
Forum Stats:
Groups: 23
Forums: 97
Topics: 3538
Posts: 20289
Newest Members:
Jeffrey Funk, Tom, churndashmaven, cameliacity, fred.f.chopin, RuoYi, rodeoneerer, NWBABjorn, mddangelo, NevillbergerModerators: Steve McGrew: 77, N.W.B.A.: 72, webmaster: 0, bluehost: 0
Administrators: admin: 540